Skip to content

The Best Uei Dl49 Digital Clamp Meter of 2023 – Reviewed and Top Rated

After hours researching and comparing all models on the market, we find out the Best Uei Dl49 Digital Clamp Meter of 2023. Check our ranking below.

2,731 Reviews Scanned

SaleRank No. #1


INGCO Auto Ranging Digital Clamp Meter TRMS 6000 Counts Measures AC/DC Voltage to 600V, AC/DC Current to 600A, Resistance Capacitance Diode Test Temperature Multimeter

  • WIDE RANGE OF TESTS. INGCO TRMS auto ranging clamp meter meets your different needs for measuring, including AC/DC voltage, AC/DC current, resistance, capacitance, diode test, frequency, duty-cycle, temperature, etc.
  • EASY TO USE. The backlight changes to orange when volt > 80V or current > 3A with dual readings; Flashing light helps place the probes to correct position; Hold function locks data for easy reading; The orange backlight is on, and the buzzer sounds when resistance value
  • PROFESSIONAL MULTIMETER. Automatic range turntable design and NCV non-contact measurement. The low pass filter (LPF) ensures accurate drive output measurements; LowZ (low input impedance voltage measurement) can safely troubleshoot sensitive electronic or control circuits that may contain false voltages, and can more reliably determine whether there is a voltage on the circuit
  • ALL ON ONE DEVICE. 100mF large capacity. INGCO clamp meter can be used as clamp meter as well as capacitance meter. 100mF equals 100000μF. It’s perfect for testing professional electrical issues, like automotive, industrial and household issues
  • WORRY-FREE ORDER. If you are not 100% satisfied with our clamp meter, we offer you 90 days refund or replacement. If you have any problem, please contact with us by email, we will solve it for you within 24 hours
SaleRank No. #2


Digital Clamp Meter T-RMS 6000 Counts, Multimeter, Non Contact Voltage Test Auto-ranging, Measures Current Voltage, Capacitance, Resistance Diode Continuity (AC/DC Current Clamp Meter) from Plusivo

  • Multi -Function T-RMS clampmeter that accurately measures linear or non-linear loads: can measure AC and DC current, AC and DC voltage, Low impedance, Continuity/Resistance/Capacitance, Temperature, Frequency, and Duty Cycle; Easy to use and operate
  • Non-Contact Voltage (NCV) Detection: check if a conductor being measured carries a voltage higher than 90V AC without touching any wires; NCV sensor is at the tip of the clamp, press NCV to display EF, bring the sensor close to the conductor under test
  • LCD display, low battery detection, overload protection, auto power off after 15 minutes, flashlight; meets IEC safety standard 61010-1 with the CAT III 600V overvoltage protection standard
  • Test probes (2 types), test clips, dupont wire probes, crocodile clips, mini crocodile cable, thermocouples, mini wire stripper tool, mini screwdrivers, electrical tape, user guide (also with e-copy of user guide which can be downloaded using claim code)
  • Includes durable carrying bag for storage; 30-day manufacturer guarantee and lifetime customer support
Rank No. #4


Klein Tools CL120VP Electrical Voltage Test Kit with Clamp Meter, Three Testers, Test Leads, Pouch and Batteries

  • Clamp Meter Electrical Test Kit
  • Clamp Meter Electrical Test Kit
  • Clamp Meter Electrical Test Kit
  • Clamp Meter Electrical Test Kit
  • Clamp Meter Electrical Test Kit
SaleRank No. #5


KAIWEETS HT206D Digital Clamp Meter T-RMS 6000 Counts, Multimeter Voltage Tester Auto-ranging, Measures Current Voltage Temperature Capacitance Resistance Diodes Continuity Duty-Cycle (AC/DC Current)

  • True-RMS clamp meter: This multimeter can accurately measure AC/DC Current, AC/DC Voltage, Frequency or Duty Cycle, Resistance, Capacitance and also provides Diode, Continuity and Temperature tests. True RMS for accurate measurements on non-linear loads. Easy to use for labs factories and household.
  • LowZ & LPF: Low input impedance helps prevent false readings due to ghost voltage. Low Pass Filter (LPF) for accurate measurement of variable frequency drive signals when measuring motors and transformer. To measure the current you need to clamp the meter around one of the wires and not the whole power cord.
  • NCV Detection Function: Non-contact voltage detection effectively check electrical status through measuring EM field intensity without touching any wires; The NCV button lies on the right side. Simply place your thumb on it and push.
  • Multi-function: Two-color backlit LCD Display – When the voltage > 80V, the current > 3A, the LCD backlit screen turns red to warn you of high voltage/ LED Flashlight / Temperature Measurement for liquids and air conditioning ports included K-Type Thermocouple / Low Battery Indication / Auto power off after 15 minutes inactivity.
  • Safety Service: Safety standard IEC 61010-1, CAT III 600V. Double insulation. 36 Months product service provided. 7/24 Customer Service.
Rank No. #6


Digi Clamp Meter AC Auto-Ranging 400 Amp with Temp

  • Digi Clamp Meter AC Auto-Ranging 400 Amp with Temp
  • Digi Clamp Meter AC Auto-Ranging 400 Amp with Temp
  • Digi Clamp Meter AC Auto-Ranging 400 Amp with Temp
  • Digi Clamp Meter AC Auto-Ranging 400 Amp with Temp
  • Digi Clamp Meter AC Auto-Ranging 400 Amp with Temp
SaleRank No. #8


AstroAI Digital Clamp Meter Multimeter 4000 Counts Auto-ranging Amp Voltage Tester Measuring AC/DC Voltage & Current, Resistance, Capacitance, Frequency, Continuity, Live Wire Test, NCV Detection

  • Versatile Digital Clamp Meter: Accurately measures AC/DC Current, AC/DC Voltage, Capacitance, Frequency, Duty Cycle, Resistance, Diode, Continuity and Live Wire Tests. This clamp meter is a really useful tool for solving industrial and household electrical issues.
  • Non-contact Voltage Testing: This Clamp Meter features non-contact voltage testing with sound and light alarms. When the Meter senses a weak AC signal, the green indicator light will come on and the buzzer will emit a slow, audible beep. when the Meter senses a strong AC signal, the red indicator light will come on and the buzzer will emit a brief beep
  • Multifunctional & Easy to read: Support Data Hold, Max/Min, Auto power off after 15 minutes inactivity, low battery indicator and continuity buzzer. The LCD Backlit Screen and Flashlight make it easy to use in a dark working area. ZERO function decreases the data error influenced by the Earth’s magnetic field, and helps you to obtain a more accurate measurement.
  • Large Jaw Opening: The jaw opening measures current in a conductor without touching or interrupting the circuit. Its slim and compact size makes it easy to operate in narrow spaces.
  • Additional Tips: This clamp meter has passed the environmental pollution test degree 2 and overvoltage category III 600V safety standards. Combined with Amazon’s excellent delivery, we provide lifetime technical support.
Rank No. #9


Klein Tools CL120 Digital Clamp Meter, Auto-Ranging 400 Amp AC, AC/DC Voltage, Resistance, Continuity, Non-Contact Voltage Tester Detection

  • Clamp Meter measures AC current and NCVT via clamp and AC/DC voltage, resistance and continuity via test-leads
  • Non-contact voltage tester integrated into the clamp jaw
  • Backlit LCD for ease of viewing in low light
  • Auto ranging measurements
  • Test lead holder on side of clamp and optional magnetic hanger for meter (Cat. Nos. 69445 or 69417) for hands-free operation
Rank No. #10


Hantek CC-65 AC/DC Current Clamp Meter Transducer for Digital Multimeter Oscilloscope with BNC Type Connector

  • Hantek amp clamp AC/DC frequency range: Up to 20 kHz;
  • hantek cc65 Effective Measurement Range: 20mA to 65A DC;
  • The oscilloscope current probe is with Accurate circuit measurement and suitable for DSO;
  • Hantek CC-65 amp clamp is Friendly in use: turn on, clamp it over a conductor, and get a reading;
  • The current probe is with Output: BNC connector;
SaleRank No. #11


AstroAI Multimeter 2000 Counts Digital Multimeter with DC AC Voltmeter and Ohm Volt Amp Tester ; Measures Voltage, Current, Resistance; Tests Live Wire, Continuity

  • VERSATILE DIGITAL MULTIMETER – Accurately measures AC/DC Voltage, DC Current, Resistance, and Diode. This Multimeter is a really useful tool for solving industrial and household electrical issues. Suitable for Household Outlets, Fuses, Batteries (including Vehicles), Automotive Circuit Troubleshooting, Charging System, Testing electronics in Cars etc.
  • TROUBLESHOOTING WITH Accuracy – This Multimeter has a sampling speed of 2 times per second; Built-in a backlight LCD display with 3 ½ digits (1999 count) 0.6”, and high polarity including negative and positive readings.
  • ENSURES SAFETY – Double ceramic fuse is anti-burn and protects from overloading.The silicone cover is able to protect the multimeter from failing damage and prevent electric shocks. And low battery indication will be displayed when battery power is low.
  • EASE OF USE – Support Data Hold, low battery indicator and continuity buzzer. Includes Convenient feature like LCD Backlit Screen makes it easy to use in dimly light areas. Battery / Set of Test Leads / User Manual/ are Included.
  • ADDITIONAL TIPS – This Multimeter is designed to troubleshoot a variety of automotive and household electrical problems safely and accurately. It’s a suitable tool if you want to do some household or commercial improvements whether DIYers or Hobbyists. (NOTE: This meter can not test AC Current; Ensure your multimeter is set to the correct setting before testing)
Rank No. #12


UEi Test Instruments PDT650 Folding Pocket Digital Thermometer,Yellow

  • The Product Is Easy To Use
  • The Product Is Durable
  • True-Rms For Accurate Measurement In All Applications
  • Country Of Origin : China
  • -58 to 572-degreeF (-50 to 300-degreeC)
SaleRank No. #13


KAIWEETS HT208D Inrush Clamp Meter 1000A True RMS AC/DC Current Amp Meter, VFD, LOZ Mode, 6000 Counts, Measures Current Voltage Temperature Capacitance Resistance Diodes Continuity Duty-Cycle

  • True-RMS Clamp Meter: This multimeter can accurately measure 1000 Amp AC/DC Current, 1000V AC/DC Voltage, Frequency, Duty Cycle, Resistance, Capacitance, Diode, Continuity and Temperature. Easy to use for labs factories and household.
  • Inrush Current Meter: Knowing the value of inrush current can help you locate a startup problem quickly, whether it’s in the motor or in the starting circuit. The measuring time of inrush current is about 100ms. When the current is greater than 10A, the Inrush function works well.
  • NCV Detection & LED Flashlight: Built-in Non-Contact Voltage (NCV) Detector can easily and quickly determine whether there is a voltage. Convenient LED flashlight illuminates a dimly lit area.
  • Advanced Functions: The Clamp Meter has Variable Frequency Drive Filtering (VFD) and low Input Impedance (LoZ) modes, which can provide higher accuracy readings.
  • Safety Service: Safety standard IEC 61010-1, CAT IV 600V, CAT III 1000V. Double insulation. Use high-quality material, prevent electric shock harm. 36-Month product service provided. 7/24 Customer Service.
Rank No. #14


UNI-T UT210E Mini Digital Clamp Meter Handheld RMS AC/DC Resistance Capacitance Tester

  • VFC, low pass filter
  • NCV testing
  • Ergonomic and lightweight
  • Auto range, 2~3/s sampling rate
  • True RMS
SaleRank No. #15


Etekcity Digital Clamp Meter Multimeter AC Current and AC/DC Voltage Tester with Amp, Volt, Ohm, Continuity, Diode and Resistance Test, Auto-Ranging, Red, MSR-C600

  • Accurately Measures: AC/DC voltage, only for AC current (not for DC current), resistance, and also provides diode and continuity tests
  • Jaw Opening: the Clamp measures the AC current in a conductor up to 26mm without interrupting the circuit
  • Additional Features: data hold, max reading, and an easy-to-read large LCD
  • Easily Carrying: comes with a handy carrying pouch, perfect for use while you’re on the go
  • Sleep Mode: automatically enters sleep mode after 15 minutes of inactivity for energy conservation
SaleRank No. #16


Fluke 323 Clamp Meter For Commercial/Residential Electricians, Measures AC Current To 400 A,Measures AC/DC Voltage To 600 V, Resistance And Continuity, Includes 2 Year Warranty And Soft Carrying Case

  • Digital clamp meter measures AC current to 400 amp, AC and DC voltage to 600 v, and resistance to 4 kilo ohms. Does not measure DC current
  • The true RMS sensing meter provides accurate readings when measuring linear or non-linear loads, regardless of waveform
  • Jaw opening measures current in a conductor up to 30 millimeter without touching or interrupting the circuit. Resistance accuracy: 1.0% ± 5 digits
  • Audible continuity sensor confirms that the circuit conducts electricity
  • Meets IEC safety standard 61010 1, and is rated for CAT IV installations to 300V and CAT III installations to 600V
Rank No. #17


Klein Tools CL600 Electrical Tester, Digital Clamp Meter has Autorange TRMS, Measures AC Current, AC/DC Volts, Resistance, NCVT, More, 1000V

  • Clamp Meter with automatically ranging true mean squared (TRMS) technology for increased accuracy
  • Amp Clamp measures AC current
  • Test leads measure AC/DC voltage, resistance, continuity and tests diodes
  • CAT IV 600V, CAT III 1000V, Class 2, Double insulation safety rating
  • Built to withstand a 6.6-foot (2 m) drop
Rank No. #18


UEi DL379B Digital Clamp Meter Auto Ranging, HVAC Current Voltage Tester w/ Magnetic Mount, Measures AC Amps AC/DC Volts Temperature Capacitance Frequency Diodes Duty Cycle Continuity Resistance NCV

  • 🛠️ INDUSTRIAL GRADE: The DL379B is a commercial grade clamp meter with enhanced capabilities for every industrial setting. Our clamp meter measures AC Amps, AC/DC Volts, AC Microamps 2000µA, Capacitance 2000µF, Frequency, Duty Cycle, Diode Testing, Temperature, Continuity, and Resistance 40MΩ.
  • 🦺 ENHANCED SAFETY: The DL379B provides increased safety with a CAT IV 300V & CAT III 600V safety rating. This clamp meter includes Non-Contact Voltage to identify live lines. There are input jack locks to protect your meter from blowing a fuse.
  • ✨ GREAT DESIGN: Our clamp meter includes and easy to read backlit dual display with a magnetic mount for handsfree operation. The unit also has a work light to illuminate dark areas and test lead storage for easy transport. Other features include Min/Max, auto power off to conserve battery, and a Low Battery Indicator.
  • 🧰 COMPLETE KIT: Also included with your clamp meter are test leads, K-Type temperature probe, 2 AAA batteries, and a zippered pouch for easy transportation.
  • ✅ WARRANTY: The DL379B has a 3-year limited warranty. All warranties must be redeemed in the US.
SaleRank No. #19


UEi DL389B Digital True RMS Clamp Meter, HVAC 4000 Counts Auto Ranging Voltmeter, Measures AC & DC Volts AC Amps AC/DC Microamps Temperature Frequency Resistance Capacitance Duty Cycle NCV Diode Test

  • 🛠️ INDUSTRIAL GRADE: The DL389B is a commercial grade clamp meter with enhanced capabilities for every industrial setting. Our clamp meter measures AC Amps, AC/DC Volts, AC/DC Microamps 2000µA, Capacitance 4000µF, Frequency 199.9KHz, Diode Testing, Duty Cycle, Temperature, Continuity, and Resistance 40MΩ.
  • 📈 TRUE RMS: This industrial clamp meter features True RMS providing accurate measurements on any type of load.
  • 🦺 ENHANCED SAFETY: The DL389B provides increased safety with a CAT IV 300V & CAT III 600V safety rating. This clamp meter includes Non-Contact Voltage to identify live lines. There are input jack locks to protect your meter from blowing a fuse.
  • ✨ GREAT DESIGN: Our clamp meter includes and easy to read backlit dual display with a magnetic mount for handsfree operation. The unit also has a work light to illuminate dark areas and test lead storage for easy transport. Other features include Auto/Manual Ranging Modes, Min/Max, auto power off to conserve battery, and a Low Battery Indicator.
  • 🧰 COMPLETE KIT: Also included with your clamp meter are test leads, K-Type temperature probe, 2 AAA batteries, and a zippered pouch for easy transportation.
SaleRank No. #20


ELIKE Digital Multimeter Amp Volt Clamp Meter Voltage Tester with True RMS, NCV,AC/DC Voltage,Resistor,Diode,Continuity,Auto-ranging,3266TA

  • Ture RMS Clamp Meter: the clamp meter can accurately measure AC/DC voltage, AC current,resistance,and also diode.True RMS is for accurate measurements on non-linear loads.
  • NCV Detection Function:Non-contact voltage detector effectively senses AC voltage and flashes without contact with any wires.
  • Continuity Test and Overload Protection: Designed to safely and accurately confirm the circuit conducts electricity with low voltage Indication and overload protection. Light alarm if detects the AC voltage or live wire.Shows “OL” on the LCD if overload.
  • Easy to Use:Small and portable to carry and use. High resolution, large backlit LCD screen improves visibility. The flashlight can access measurement in a dark place. Low battery display.Confidently diagnose automotive, industrial, and household electrical issues.
  • Safety Guarantee: Safety standard IEC 61010-1, CAT III 600V. Double insulation. 12 months product warranty provided.

Last update on 2021-10-31 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API

How Do You Buy The Best Uei Dl49 Digital Clamp Meter?

Do you get stressed out thinking about shopping for a great Uei Dl49 Digital Clamp Meter? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Uei Dl49 Digital Clamp Meter, which is why we have assembled a comprehensive list of the greatest Uei Dl49 Digital Clamp Meter available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Uei Dl49 Digital Clamp Meter that you consider buying. Your questions might include the following:

  • Is it worth buying an Uei Dl49 Digital Clamp Meter?
  • What benefits are there with buying an Uei Dl49 Digital Clamp Meter?
  • What factors deserve consideration when shopping for an effective Uei Dl49 Digital Clamp Meter?
  • Why is it crucial to invest in any Uei Dl49 Digital Clamp Meter, much less the best one?
  • Which Uei Dl49 Digital Clamp Meter are good in the current market?
  • Where can you find information like this about Uei Dl49 Digital Clamp Meter?

We’re convinced that you likely have far more questions than just these regarding Uei Dl49 Digital Clamp Meter, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Uei Dl49 Digital Clamp Meter, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Uei Dl49 Digital Clamp Meter. Make sure that you are only using trustworthy and credible websites and sources.

We provide an Uei Dl49 Digital Clamp Meter buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Uei Dl49 Digital Clamp Meter currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

  1. Brand Value: Every brand of Uei Dl49 Digital Clamp Meter has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
  2. Features: What bells and whistles matter for an Uei Dl49 Digital Clamp Meter?
  3. Specifications: How powerful they are can be measured.
  4. Product Value: This simply is how much bang for the buck you get from your Uei Dl49 Digital Clamp Meter.
  5. Customer Ratings: Number ratings grade Uei Dl49 Digital Clamp Meter objectively.
  6. Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Uei Dl49 Digital Clamp Meter.
  7. Product Quality: You don’t always get what you pay for with an Uei Dl49 Digital Clamp Meter, sometimes less, and sometimes more.
  8. Product Reliability: How sturdy and durable an Uei Dl49 Digital Clamp Meter is should be an indication of how long it will work out for you.

We always remember that maintaining Uei Dl49 Digital Clamp Meter information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Uei Dl49 Digital Clamp Meter is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

Related Post:

Leave a Reply

Your email address will not be published.