Skip to content

The Best Usb 20 Header Splitter of 2023 – Reviewed and Top Rated

After hours researching and comparing all models on the market, we find out the Best Usb 20 Header Splitter of 2023. Check our ranking below.

2,175 Reviews Scanned

Rank No. #1


zdyCGTime USB 3.1 Front Panel Header to USB 3.0 20Pin Header Extension Cable for ASUS Motherboard 20cm Black (20p)

  • Work for ASUS Motherboard. plz note that ONLY support usb3.1/usb3.0 device, it can’t work at USB2.0(480Mbps)
  • USB 3.1 require a different front panel header than USB 3.0
  • First motherboard with this is the ASUS ROG MAXIMUS IX FORMULA,STRIX Z270I/Z270G etc.There are no official release of the specs for the USB 3.1 header yet (as of this writing)
  • The USB 3.1 port interface is using the USB 3.0 pin set and more. It is design to be backwards compatible.
  • USB 3.1 Front Panel Header to USB 3.0 Front Panel Header 20Pin Extension Cable 20cm
SaleRank No. #2


Phoneix PCI Express to Dual 20 Pin USB 3.0 PCI-e X1 to 2 ports 19pin USB3.0 Header Support Low Profile Bracket

  • Extend with 2 USB3.0 19pin connector (can expand 4 USB 3.0 ports) from desktop PC which with one free PCIe slot.
  • SuperSpeed USB 3.0 is backwards compatible with USB 1.0/1.1/2.0 devices (data transfer rate at 1.5/12/480Mbps).
  • Fully compliant with onelane (x1) PCI Express 2.0 specification.
  • SuperSpeed USB 3.0 offers 10 times performance increase over HiSpeed USB 2.0.
  • System Requirements:Windows 10/8.1/8/7/XP.Fully Plug&Play and Hot Swap compatible.
Rank No. #3


CY 2 Ports USB 3.0 Female to Motherboard 20pin Header Cable for Front Panel 20cm

  • Can use USB 3.0 type-A female convert USB3.0 (20pin Header) directly connected to the motherboard
  • With this cable, you can directly board 20pin socket (e,g Asus motherboard P7P55/USB3) converted to 2 usb3.0 socket!
  • Easily use USB3.0 data cable connected to the chassis front panel of USB3.0
  • 2 Port USB 3.0 Female to Motherboard 20pin Header cable
  • Length:20cm 0.65ft
SaleRank No. #4


LINKUP – [Active Chip] USB 3.0 (3.1 Gen 2) Internal IDC 20 Pin Motherboard Header to A-Key (Type-E) 20 Pin Female Converter for Type C Panel Mount Adapter

  • Installation Note *** USB power will always be on even when the system is shut down. Please unplug the PC power cable completely for 20 seconds before installation to avoid possible voltage spikes which may damage the chipset on the adapter. This adapter is designed to fit all USB 3.0 20 pin motherboard headers by standard specification. A small number of motherboards do not use standard USB 3.0 20 pin headers which may cause the adapter to get stuck in the socket.
  • …Forceful removal of the adapter may cause the header socket to be damaged, LINKUP is not responsible for such damage. Connector 1 (Motherboard) – USB 3.0 Internal IDC 20 Pin MB Male Housing Header. Connector 2 (Front Panel) – USB 3.1 A-Key 20 Pin Front Panel Female Header / NOTE: Does not convert from 5GB/s to 10GB/s. Not compatible with USB 2.0 motherboard IDC connector
  • Active chipset enables full USB-C features, preserves the functions of Channel Configuration pins (CC1&CC2); including attach/removal detection, plug orientation detection, and current advertisement. Also the communications required by the Power Delivery and Alternate Mode.
  • Recommended to be used with LINKUP – USB-C Type Panel Cable Mount Motherboard Header Extension Adapter (B07THC8ZVF). May not fit ITX motherboard in an ITX case due to not having enough space. 【LINKUP Cares】 Backed by a LINKUP Limited 1-Year Warranty and Complimentary Premium Online Support.
  • Note on USB current over limit issue: The power from the USB 3.0 header on the motherboard has a power rating at 4.5W (0.9A x 5V). However, many USB-C devices can withdraw power up to 100W (20A x 5V). This may result in a power shut down to protect the motherboard and its components. Not compatible with iPad Pro and other tablets for charging through this port.
Rank No. #5


Duttek USB 3.0 Motherboard Adapter,USB 3.0 Header to USB 3.0 Port Adapter, 20 Pin USB 3.0 Header Female to Dual USB 3.0 Female Splitter Motherboard Adapter for PC Motherboard Mainboard

  • USB 3.0 Motherboard adapter Compatible with USB 3.0 Super Speed 20 pin Motherboard Header.
  • 2 Ports USB 3.0 Header to USB 3.0 Port Adapter Color: Blue, Black; Net Weight: 18g.
  • Add extra USB 3.0 port to PC from 20 pin usb 3.0 header with this adapter.
  • USB internal splitter Adapter backwards compliant with USB 1.0 / 2.0.
  • USB header to USB port adapter is easy to use, driverless installation,USB 3.0 Splitter Adapter for Windows ME / 2000 / XP / Vista / 7 / 8 / 10 / Linux (any distribution).
Rank No. #6


AAOTOKK 20 Pin Y Splitter Cable Dual Port USB 3.0 A Female to 20 Pin Female Motherboard Header Cable for USB Ports Directly to Computer Motherboard Backward Compatible with USB 2.0/1.0 (30cm-USB F)

  • Quantity:(1-Pack) Size:Length(30cm/12inch) Color:(blue)
  • Connectors 1: 20 Pin female Motherboard Header Extension Cable, Connectors 2: 2 (Dual) Port USB 3.0 A female jack cable
  • Product Applicable Equipment: Add extra USB 3.0 ports to any PC with this dual USB 3.0 Female ports to motherboard Y cable
  • Dual USB 3.0 A Type Female to 20Pin Header Slot Adapter for Motherboard – External to Internal
  • The transfer spped of the USB 3.0 A cable can reach 5.0Gbps (500MB/s),which make data transfer quicker.can also be used with either USB 1.1 or USB 2.0 peripherals.
Rank No. #7


Cablecc USB 3.1 Front Panel Header to USB 3.0 20Pin Header Extension Cable 20cm for ASUS Motherboard

  • The cable only support usb3.1/usb3.0 device, it can’t work at USB2.0(480Mbps)
  • USB 3.1 require a different front panel header than USB 3.0. The USB 3.1 port interface is using the USB 3.0 pin set and more. It is design to be backwards compatible (will explain later).
  • There are no official release of the specs for the USB 3.1 header yet (as of this writing), But first motherboard with this is the ASUS ROG MAXIMUS IX FORMULA,STRIX Z270I/Z270G etc.
  • Connector1: USB 3.0 Front Panel Header Connector2: USB 3.1 Front Panel Header
  • Length: 20cm
Rank No. #8


USB 3.0 Motherboard Adapter Cable,20 Pin Y Splitter Cable Dual Port USB 3.0 A Female to 20 Pin Female Motherboard Header 24/28AWG Cable for USB Ports to Computer Motherboard Backward 25cm-Black

  • ✪ Suitable for converting the two standard USB 3.0 A sockets on the back of the motherboard to the two USB 3.0A sockets connected in front of the USB 20Pin
  • ✪ USING THIS ADAPTER, the mainboard 20PIN socket can be directly converted into 2 USB3.0 sockets.plug and play easily,It is very convenient for you to connect the USB3.0 data cable to the USB3.0 panel in front of the case.
  • ✪ This USB 3.0 cable can be installed into a standard PC slot and will be connected internally to any USB 3.0 20 pin header socket. It expands your system by two external USB 3.0 ports and enables the connection of different USB devices.
  • ✪ 2 PORTS USB 3.0 FEMALE to motherboard header adapter cable, superspeed USB3.0 extension code(Theoretically reach 5Gps), USB 3.0 female port backwards compatible with USB 2.0、1.0
  • ✪ NOTE: The Y type cable has 19 pins but the connector has 20 holes, one hole is unused. Cable Length : 25cm (include connector)
Rank No. #9


Nightwolf Black 16 Inch Single Port USB 3.1 Type C USB-C Female to USB 3.0 Motherboard 19pin Header Y Splitter Cable

  • Single Port USB 3.1 Type C USB-C Female to USB 3.0 Motherboard 19pin Header cable;
  • You can convert the 19pin motherboard internal usb 3.0 port to external USB type C socket.;
  • This cable makes inside the computer motherboard usb 3.0 19pin to USB 3.1 female adapter use.
  • Support 10Gbps rate.
  • With this adapter cable, you can directly board 19pin socket in computer motherboard.
Rank No. #10


VizGiz 20 PIN USB 3.0 Internal Header Y Splitter Cable 20PIN to 2 Ports USB3.0 Female AF Connector Slot Plate Bracket PCI Panel I/O Back Front Expansion Motherboard

  • Package include: 1*USB Cables with bracket ( Black )
  • Add extra 3.0 USB ports to any PC with this dual USB 3.0 to motherboard Y adapter cable with PCI rear bracket.
  • Features one 20-Pin IDC motherboard Header on one end,which fans out to two USB 3.1 Type-A Female
  • Backwards compatible with USB 2.0&1.1
  • Connector: USB 3.0 20-pin header to 2 x A Female
SaleRank No. #11


USB Front Panel Adapter, JoyReken Vertical USB C Header Adapter, USB 3.1 Type-E Key-A to USB 3.0 20Pin Header Converter for Type C Motherboard

  • Supports all motherboards with USB 3.0/ 3.1 19-pin header
  • Motherboard: USB 3.0 Internal 19 Pin MB Male Housing Header
  • Front Panel: USB 3.1 A-Key 20 Pin Front Panel Female Header / NOTE: Does not convert from 5GB/s to 10GB/s
  • Easy way to access USB-C and support front panel header, doesn’t require to have latest motherboard to experience USB-C technology.
  • Note on USB current over limit issue: The power from the USB 3.0 header on the motherboard has a power rating at 4.5W (0.9A x 5V). However, many USB-C devices can withdraw power up to 100W (20A x 5V). This may result in a power shut down to protect the motherboard and its components.
Rank No. #12


LINKUP – USB 2.0 Female to USB 3.0 Male 20 Pin IDC Motherboard Header Active Compatible Converter Compatible with LINKUP Type C USB-C Chipset and Panel Mount

  • 【Upgrade from USB 2.0 to USB 3.0 or USB 3.1】Allows USB 2.0 motherboards with 9pin headers to be upgraded to USB 3.0 or 3.1.
  • 【Noise Reduction】 Shielded to minimize Electromagnetic / Radio Frequency Interference (EMI / RFI) , Cable Length : 26 cm / 10 inches
  • 【LINKUP Cares】 Backed by a LINKUP Limited 1-Year Warranty and Complimentary Premium Online Support
Rank No. #13


Duttek USB 3.0 Header to USB 2.0,USB 3.0 to USB 2.0 Motherboard Adapter Cable,19 Pin USB3.0 Male to 9 Pin USB2.0 Female Motherboard Cable Adapter Converter 6 inch/15cm (2-Pack)

  • 19 pin USB 3.0 motherboard adapter offers a throughput of up to 4.8Gbps when used with a USB 3.0 host and device , which astounding the capability of USB 2.0 (480Mbps).
  • usb 3.0 header to usb 2.0 adapter cable use molded-strain relief construction for flexible movement, durability, and fit.
  • USB 3.0 to USB 2.0 motherboard adapter cable complies with fully rated cable specification using braid-and-foil shield protection.
  • USB3.0 technology of USB 3.0 motherboard adapter is similar to PCI Express 2.0(5 Gbit/s) It uses 8 B10B encoding,linear feedback shift register (LFSR) scrambling for data, spread spectrum.
  • Let your USB 3.0 motherboard adapter 19 pin device connected the USB 2.0 9 pin motherboard.
Rank No. #14


9pin USB Header Male 1 to 2 Female Extension Splitter Cable Connector Adapter (Male 1 to 2 Female)

  • This listing is for 1pc multiplier, One connect to motherboard 9pin(10pin) port, Split to 2x 9-Pin(10-pin)
  • Port Multiplier version: 1 to 2
  • Connector A: 9Pin USB Header Male
  • Connector(s) B: 2X 9Pin USB Header Female
  • Lenght: about 30CM
Rank No. #15


Right Angled USB 3.0 20-pin Male to Female Extension Adapter,Gelrhonr Desktop Motherboard 90 Degree Angled USB 3.0 19-Pin Motherboard Internal Header-Black 2PCS

  • ✪USB 3.0 19/20pin Male to Female Extension Adapter:Two Angled Type: Down Angled and Up Angled.Suitable for Desktop motherboard.This motherboard header can solve the problem that the problem of accidentally breaking the motherboard pin by the 19P cable that is inserted in the motherboard.
  • ✪High Performance:Super-speed up to 5Gbps 10× faster than USB 2.0 Version.Support two-way data transmission at the same time. And lossless transmission.
  • ✪ Wide Compatibility:USB 3.0 19-Pin Motherboard Internal Header is standard USB 3.0 20 pin connector, so it will work with all of USB3.0 19 pin/20 pin ports on the motherboard such as Gigabyte.
  • ✪High quality:Made of high-quality ABS material and electronic components.Small size and light weight, the height is only 14mm.Strong and durable, long service life.
  • ✪Easy to install:Plug & play.But note the standard slot design,do not try to remove once plugged into motherboard.If you tried to remove it,removeed by professionals to prevent damage the motherboard.
Rank No. #16


Rocketek 9pin USB Header Male 1 to 4 Female Extension Card USB 2.0 Splitter Cable Connector for Motherboard, Adapter Port Multiplier for CPU, WiFi Receiver, Fans, and RGB Light …

  • ✔ Motherboard USB header splitter 1 to 4 ports Hub, wire belt shielding
  • ✔9 Pin USB Header for PC motherboard Can Prevent short circuit outlet design. motherboard USB splitter can prevent accidental removal of circuit board, pins and case the risk of short circuit
  • ✔ USB Splitter Convert motherboard USB 2.0 Female to 4 Females. High-quality electronic components
  • ✔ 30cm 9 pin USB Header Male 1 to 4 and hub connecting
  • ✔ Self-Stick 9 pin Motherboard USB Splitter for easy installation, automotive adhesive tape is attached on the back, can be directly fixed on the mainboard or chassis
Rank No. #17


Cablecc 1set Reversible USB 2.0 9Pin Housing to Motherboard USB 3.0 20pin Header Female Adapter

  • Let your USB 3.0 20pin device connected the USB 2.0 motherboard.
  • or Let your USB 2.0 9pin device connected the USB 3.0 motherboard.
  • Data speed: 480Mbps for USB 3.0 device.
  • The package included two adapters.
SaleRank No. #18


Silverstone Tek Internal 19-Pin USB3.0 to USB2.0 Adapter Cable (G11303050-RT)

  • Backward converter for installing a USB 2.0 motherboard into a case with USB 3.0 ports.
  • Retail Package
  • Universal Fitting
Rank No. #19


Traodin 20Pin to USB3.0 Adapter, 2 Port USB 3.0 Splitter Adapter USB Type A Female to 20 Pin Motherboard Header Extension Connector for PC Motherboard Mainboard(1Pcs)

  • USB 3.0 Motherboard adapter Compatible with USB 3.0 Super Speed 20 pin Motherboard Header.2 Ports USB 3.0 Header to USB 3.0 Port Adapter
  • Driver-less installation for Windows ME / 2000 / XP / Vista / 7 / 8 / 10 / Linux (any distribution)
  • USB 3.0 female type A ports to 20 pin MB adapter Reverse compliant with USB 1.0 / 2.0
  • Expands two USB3.0 A Female Ports from your 19pin USB3.0 pin header,Super Speed usb 3.0 cable 5Gbps Data Transfer Rate.
  • Package Content: 1 x USB 3.0 Connector
Rank No. #20


PCI-E X1 to 2 Ports 19 Pin USB 3.0 Header PCI Express to Dual 20 Pin USB 3.0 Card

  • Chipset: NEC UPD720201
  • Extend with 2 USB3.0 19pin connector (can expand 4 USB 3.0 ports) from desktop PC which with one free PCIe slot.
  • SuperSpeed USB 3.0 is fully compatible with original USB system, peripherals and cables.
  • Fully compliant with onelane (x1) PCI Express 2.0 specification.
  • Two internal 5Gbps SuperSpeed USB 3.0 19pin headers.

Last update on 2021-11-05 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API

How Do You Buy The Best Usb 20 Header Splitter?

Do you get stressed out thinking about shopping for a great Usb 20 Header Splitter? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Usb 20 Header Splitter, which is why we have assembled a comprehensive list of the greatest Usb 20 Header Splitter available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Usb 20 Header Splitter that you consider buying. Your questions might include the following:

  • Is it worth buying an Usb 20 Header Splitter?
  • What benefits are there with buying an Usb 20 Header Splitter?
  • What factors deserve consideration when shopping for an effective Usb 20 Header Splitter?
  • Why is it crucial to invest in any Usb 20 Header Splitter, much less the best one?
  • Which Usb 20 Header Splitter are good in the current market?
  • Where can you find information like this about Usb 20 Header Splitter?

We’re convinced that you likely have far more questions than just these regarding Usb 20 Header Splitter, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Usb 20 Header Splitter, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Usb 20 Header Splitter. Make sure that you are only using trustworthy and credible websites and sources.

We provide an Usb 20 Header Splitter buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Usb 20 Header Splitter currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

  1. Brand Value: Every brand of Usb 20 Header Splitter has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
  2. Features: What bells and whistles matter for an Usb 20 Header Splitter?
  3. Specifications: How powerful they are can be measured.
  4. Product Value: This simply is how much bang for the buck you get from your Usb 20 Header Splitter.
  5. Customer Ratings: Number ratings grade Usb 20 Header Splitter objectively.
  6. Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Usb 20 Header Splitter.
  7. Product Quality: You don’t always get what you pay for with an Usb 20 Header Splitter, sometimes less, and sometimes more.
  8. Product Reliability: How sturdy and durable an Usb 20 Header Splitter is should be an indication of how long it will work out for you.

We always remember that maintaining Usb 20 Header Splitter information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Usb 20 Header Splitter is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

FAQ:

Q: What is internal USB header?

A: While internal USB ports are rare on consumer motherboards, these headers (especially the USB 2.0 ones) are found on just about every motherboard around . There are very inexpensive adapter cables/modules you can use to turn those headers into functional USB ports and they require no more work than opening your case and plugging them in.

Q: What is an USB port splitter?

A: What is a USB port splitter? A USB splitter is a compact hardware device designed to divide one USB port into several lines so that a user can attach one peripheral to several computers simultaneously. You simply connect your USB device to this hardware and it runs separate communication lines to each computer.

Q: What is a hub splitter?

A: The hub is a small device with female USB ports that usually sits next to your computer on your desk. However, a USB splitter divides one line into two and is usually used to plug one printer into two computers. Much like a telephone wire splitter, the printer plugs into the splitter and two lines run to separate ports on each computer.

Related Post:

Leave a Reply

Your email address will not be published.